|Place of Origin:||Hunan, China|
|Brand Name:||ENYU DRILL|
|Certification:||ISO9001: 2008, SGS|
|Minimum Order Quantity:||1 PCS|
|Delivery Time:||15-30 days|
|Supply Ability:||1000 PCS/ Month|
|Weight (less Bit):||72.50 Kg||Length (less Bit):||1175 Mm|
|Hole Range:||∅135-∅155||Working Pressure:||1.0-2.5Mpa|
SD5 Down The Hole Hammer DTH Hammers And Bits For Mining And Quarrying
SD5 down the hole hammer is ideal for use in hard, stable rock drilling applications and overburden drilling applications that require casing systems. Compared to conventional air-powered DTH hammers or top hammers, water-powered DTH hammers offer a wide range of advantages, including low energy consumption, a cleaner environment, minimal hole deviation, deeper drilling capabilities, a high power output ratio and minimal impact on the surrounding ground.
|Length (less bit)||Weight(less bit)||External diameter||Bit shank||Hole range||Connection thread|
API 3 1/2"Reg
|Working Pressure||Impact rate at 0.5 Mpa||Recommended rotation speed||Air consumption|
|1.0-2.5Mpa||25HZ||25-35r/min||9 m³/min||15m³/min||23 m³/min|
1. A good performance in central air exhaust and cuttings discharge, which reduces the repeated crushing of rock.
2. Valveless hammers
3. Long service life, less failure and easier to maintain
4. Lower air consumption
It is mainly used in mining and quarrying.